BARE-SHELL GUTTING & RETROFIT PREPARATION
commercial bare-shell gutting specialists for
commercial & institutional retrofits.
Disciplined internal soft and hard strip-out of commercial offices, retail spaces, hotels, hospitals, and buildings prior to interior fit-out, structural retrofit, or full demolition.
Scope & Type of Work Covered
As an engineering-led Interior Strip-Out Contractor in Delhi, we execute safe, methodical site operations tailored to urban and industrial plot constraints. As an engineering-led commercial bare-shell gutting specialist, we execute safe, methodical site operations tailored to urban and industrial plot constraints. Before a commercial floor plate can be refitted for a new corporate tenant, or before an existing building undergoes structural renovation or full demolition, all non-structural internal elements must be stripped back cleanly to the bare structural shell.
RPC INFRAPROJECTS PVT. LTD. executes commercial and industrial interior strip-out works across Delhi, Gurugram, Noida, and NCR commercial corridors. Our crews work neatly inside multi-tenanted towers, malls, and standalone buildings—managing noise hours, service elevator protection, dust containment, and night-shift debris haulage.
- Partitions & Internal Walls: Removal of drywall/gypsum partitions, glass cubicles, wooden panelling, and non-load-bearing brick or AAC block masonry walls.
- Flooring & Screed Removal: Lifting of vitrified tiles, marble/granite stone, raised access flooring, carpets, and chipping of cement mortar floor screed down to the mother RCC slab.
- Ceilings & Acoustic Finishes: Dismantling of grid/gypsum false ceilings, wooden baffles, wall cladding, and thermal/acoustic insulation.
- Redundant MEP & Joinery Strip-Out: Removal of decommissioned HVAC ducting, AHU units, cable trays, lighting fixtures, plumbing/sanitary ware, doors, and fixed workstations.
Typical Project Requirements & Structural Context
Interior strip-out projects fall into two primary operational environments:
| Strip-Out Scenario | Site Constraints | Execution & Debris Protocol |
|---|---|---|
| Live Commercial Tower / Mall Fit-Out Return | Strict noise hours (often night shift), shared service lifts, zero dust escape to common lobbies | Negative-pressure/sealed polythene barriers, hand tools & low-noise chipping, bagged debris removal via service lift during night window |
| Standalone Building Gutting / Pre-Demolition | Full building handover; separation of C&D waste from wood/glass/metal | Floor-by-floor strip-out, external debris chutes or shaft drop zones, direct tipper loading at ground level |
Structure, Site & Engineering Considerations
Before mobilizing machinery for Interior Strip-Out Contractor in Delhi, our field engineers verify adjacent foundation depths, utility lines, and tipper access corridors. Before mobilizing machinery for commercial bare-shell gutting specialist, our field engineers verify adjacent foundation depths, utility lines, and tipper access corridors. Demolition methods are never one-size-fits-all. The safe and economical approach for any project depends on structure condition, site access width, proximity to adjacent buildings, live utility coordination, structural engineering requirements, and applicable municipal permits.
During interior strip-out, the primary technical risk is accidentally damaging live base-building infrastructure—such as pressurized fire sprinkler headers, post-tensioned slab tendons embedded shallowly in the floor, or structural columns concealed inside drywall boxing.
Before chipping floor screed or demolishing internal brick walls, our supervisors verify with building facility management that all electrical circuits, water lines, and fire loops in the zone are isolated, and confirm that no load-bearing masonry wall is removed without engineering review.
In multi-storey corporate buildings and malls across Gurugram, Noida, and Delhi, we protect common service corridors, lift lobbies, and freight elevators with plywood/protective sheets during bagged rubble movement. All field works strictly follow CPCB C&D Waste Rules and CAQM environmental advisories.
Suitable Demolition Approaches & Equipment Considerations
Our four-stage interior strip-out sequence delivers a clean bare shell on schedule:
MEP Disconnection & Corridor Protection
Sign-off on electrical/plumbing isolation and protection of retained columns, fire lines, glazing, and lift lobbies.
Workstations, Ceilings, Glass & MEP
Dismantling of modular furniture, false ceilings, glass partitions, doors, HVAC ducts, and cabling.
Masonry Walls, Tiles & Floor Screed
Controlled breaking of non-load-bearing block/brick walls, bathroom cores, floor tiles, and mortar screed.
Bagged Carting & Broom-Clean Floor
Segregation of metal/wood/masonry waste, off-site tipper carting, and broom-clean bare-shell handover.
Safety, Dust Suppression & Regulatory Considerations
Interior breaking inside enclosed floor plates creates concentrated dust and noise. Our workers use dust masks/respirators, goggles, ear protection, and localized water misting, while maintaining clear fire exit paths at all times.
Night-Shift Bare-Shell Handover for Offices, Malls & Hotels
Corporate fit-out timelines depend on a disciplined interior strip-out contractor in Delhi who can gut occupied office floors and retail units without disrupting building tenants. Operating as a dedicated interior strip-out contractor in Delhi, we dismantle drywall partitions, modular ceilings, HVAC ducting, electrical raceways, and floor screed down to the structural RCC shell. Facility managers rely on our interior strip-out contractor in Delhi teams for service-lift protection, acoustic isolation, and overnight bagged debris haulage across Connaught Place, Aerocity, Saket, Nehru Place, Noida Sector 18/62/Expressway, and Gurugram Cyber City.
Information Required for an Accurate BOQ Quotation
Share your plot location, structure or excavation dimensions, approach road width, and target timeline with Mr. Anil Kumar (+91-9871797901 / purchase@rpcinfraprojects.com) for a same-day engineer inspection and commercial rate.
Frequently Asked Questions
Can you strip out an office floor at night so other tenants in the building are not disturbed?
Yes. In occupied commercial towers across Gurugram, Noida, and Delhi, we regularly execute noisy chipping and bagged debris evacuation during building-approved night and weekend windows.
Do you remove floor tiles and the underlying cement mortar screed without damaging the RCC slab?
Yes. We use controlled light electric/pneumatic chisels held at shallow angles to lift tiles and mortar bedding cleanly down to the structural slab surface.
How is interior strip-out priced?
Pricing is quoted either as an all-inclusive rate per square foot of floor area or as an itemized BOQ rate per square metre of partition/flooring removed, adjusted for salvageable metal/aluminium/cabling.